最新资讯
免费咨询热线
139-1341-3721橡胶密封件厂家浅谈世界10大密封件厂商,你都了解么?
你知道世界十大密封件制造商吗??Top ten Seal manufacturers.
密封件广泛应用于从厨房用具到核电设备的各个领域。
Seals are used in a wide range of applications.
密封件定制主要分为静态密封件和动态密封件。静态密封是指密封件及其密封装置腔体的相对固定,而动态密封是指相对运动。例如,液压缸的密封部分对缸内的缸壁进行密封,如果它在缸壁上上下移动,就是动态密封。
A static axial seal acts similar to a gasket in that it is squeezed on both the top and bottom of the O-ring's cross section. This type of seal is typically employed in the face (flange) type applications. Dynamic seal is used in situations involving reciprocating, rotating or oscillating motion. Dynamic seal performance may be substantially affected by a number of operating environmental factors.
静态密封最简单的例子就是保鲜盒的密封条
动态密封和静态密封的差异
The difference between Dynamic Seal and Static Seal.
静密封可分为三类:垫圈密封、胶水密封和接触密封。
Static seal is divided into: pad seal, plastic seal, and touch seal.
动密封可分为两类:旋转动密封和线性动密封。密封方法分为相对停止接触表面之间的静态密封和相对运动接触表面之间的动态密封。
Dynamic seal can be divided into two categories: rotary variable seal and reciprocating dynamic seal.
静密封:根据工作压力,静密封可分为低压静密封和高压静密封。中低压静密封通常由软质材料和宽垫圈组成,而高压静密封则由硬质材料和窄接触宽度的金属垫圈组成。
Static seal: According to operating pressure, static seal can be divided into low pressure static seal and high pressure static seal.
动态密封:根据密封件是否与相对运动部件接触,可分为接触式密封和非接触式密封。
Dynamic seal: According to the relative movement of the seal with the zero-degree pieces has been touched or not, it can be divided into touch-type seal and non-touch seal.
一般来说,接触式密封具有良好的密封性能,但受到摩擦和磨损的限制。适用于低密封面。在接触式密封中,根据密封的接触位置,它们可分为周向(径向)密封和端面密封。端面密封又称机械密封。
Touch-type seal has good tightness, but it has a restraint in the conflict, wear constraints. It is suitable for the lower line of the occasion.
橡胶密封件的摩擦损失
非接触式动态密封包括迷宫密封和动态密封。前者泄漏量大,一般用于密封要求低的场合。动力密封有离心密封、浮环密封、螺旋密封等,它依靠密封两侧的压力差来抵消动力部件的压差,克服泄漏。它具有较高的密封性能,但耗能大,使系统难以获得较高的压力。
Non-touch seal is used of fluid in the gap between the savings effect of limiting leakage, the leakage is much larger.
非接触式密封,由于密封面不直接接触,启动功率小,使用寿命长。如果规划合理,泄漏不会太大。然而,这种密封是在流体力学的平衡条件下工作的。如果工作条件发生变化,将导致大量泄漏,这种密封不能在市场上购买。
However, this type of seal is used of fluid mechanics to balance the work. If the working conditions changed, it will lead to a huge amount of leakage.
左侧泄漏量明显大于右边
密封材料的种类及用途
Sealing material
密封材料应满足密封功能的要求。由于密封介质不同,设备工作条件不同,对密封材料的适应性要求也不同。通常需要密封材料。
The requirements for sealing materials:
1)材料致密性好,不易泄漏。
2)适当的机械强度和硬度;
3)压缩回弹性好,永久变形小;
4)低温下不软化、不分解、不硬化、不脆裂;
5)耐腐蚀性好,长期工作在酸、碱、油等介质中,其体积和硬度变化不大,且不粘附在金属表面;
6)摩擦系数小,耐磨性好;
7)具有与密封面结合的灵活性。
8)具有良好的耐老化性和耐久性;
9)加工制造工艺方便,价格相对便宜,材料容易获得。
1) The material is tight sealing and not easy to leak;
2) It has the appropriate mechanical strength and hardness;
3) Good compressibility and resilience;
4) It will not soften under high temperature, not decomposition, not hardened under low temperature, not brittle fracture;
5) Good corrosion resistance;
6) The friction coefficient is small, good wear resistance;
7) Good flexibility;
8) Good aging resistance;
9) Convenient for processing and manufacturing.
用于动态密封的最早材料是GCI(灰铸铁灰铸铁)。橡胶是最常用的静态密封材料,常见的有:氟橡胶、硅橡胶、乙丙二烯橡胶等。
The earliest dynamic seal material is used of GCI (gray cast iron). Rubber is the most commonly used sealing material, such as: fluorine rubber, silicone rubber and EPDM rubber.
通用橡胶密封产品广泛应用于国防、化工、煤炭、石油、冶金、交通、机械制造等行业,已成为各行业的基础零部件和配件。
Rubber sealing products are used more and more widely in the national defense, chemical, coal, petroleum, metallurgy, transportation and machinery manufacturing industries.
除橡胶外,石墨及各种密封剂也适用于密封材料。目前,一些密封件主要由塑料制成,主要是PEEK、PI、PTFE和PAI。这些高温聚合物将成为未来密封件制造技术的趋势,并且密封件的价格将越来越昂贵。
Except rubber, the sealing material also use graphite and other variety of sealants to produce seals. Today, some seals use plastic as raw material, such as PEEK, PI, PTFE and PAI. These high-temperature polymers will become the trend of seal manufacturing process in the future, the price of seals will become increasingly expensive.
现在,我们来看一看世界10大密封件品牌有哪些呢?
Top ten Sealing manufacturers.
NOK是日本最古老的油封制造商。其功能部件,如油封和机械密封,均采用先进的密封技术制造。它们不仅用于汽车工业,而且广泛应用于其他行业。
NOK is Japan’s longest established oil seal manufacturer. NOK's functional parts such as oil seals and mechanical seals, created through advanced seal technology, are not only employed in the automotive industry but are also used in a wide range of other industries.
Trelleborg是一家总部位于瑞典Trelleborg的全球性工业集团。集团成立于1905年,在全球40个国家拥有约25000名员工,年销售额达50亿美元。特雷堡凭借先进的聚合物技术和广泛的专业应用知识,在行业中处于领先地位。Trelleborg是世界领先的工程聚合物解决方案的关键应用,密封,阻尼和保护在恶劣的环境。
Trelleborg is a world leader in engineered polymer solutions that seal, damp and protect critical applications in demanding environments. Our innovative engineered solutions accelerate performance for our customers in a sustainable way.
Convison?圣戈班岛的硅胶密封件用于航空领域,符合空客等飞机制造商的火灾试验、毒性试验和排烟试验标准。
Convison®silicon compounds meet different required flammability tests and toxicity and smoke emission standards such as AIRBUS ones.
圣戈班为汽车和道路交通市场提供高功能的塑料轴承、密封圈和泡沫棉。这些部件尤其用于车门、转向和制动系统、座椅和汽车发动机。汽车尾气排放控制系统采用全唇形密封圈,减少汽车尾气中有害气体的排放。
The Group also manufactures high-performance plastic bearings, seals and foams for the automobile and land transportation market. Omnilip like design products are used in automotive exhausted gas control system like EGR valves for reducing harmful gas emission.
全能?圣戈班高功能塑料弹簧储能密封圈是目前世界上唯一全自动、可重复使用的内窥镜切割器。
Saint-Gobain Performance Plastics supplies OmniSeal®spring energized seals for the world’s only battery-powered endoscopic stapler that is fully automated and reusable.
圣戈班在13年内收购了欧洲著名的密封剂制造商L+S。L+S公司主要开发和生产塑料密封胶。
In 2013, Saint-Gobain acquired the famous European seal manufacturer L+S, L+S resarch & development plastic seals.
意大利加皮集团可提供一系列不同材质的垫圈。除了O形圈的应用外,它还涉及液压和气动密封、汽车制动系统和摩托车密封。产品组合由技术聚合物部门完成,为电子和汽车工业提供广泛的密封解决方案。
Gapi Group is able to offer a complete range of sealing gaskets in different materials.In addition to the historical production of rubber O-Rings and parts as per plan, we can find a wide range of products starting from rotary shaft seals for all applications, hydraulic and pneumatic seals to seals for automotive braking systems and motorbikes.In the PTFE segment, the production and distribution of semi-finished products in virgin or filled material, is integrated by a production unit able to offer machined components in different PTFE compounds.The portfolio of products is completed by the techno-polymers’ division offering a wide sealing solution for the electronic and automotive industry.
采用独特的复合工艺,三菱的密封产品具有较好的耐磨性、低摩擦性、高响应性,并可降低设备维护成本。
Mitsubishi has gained high recommendations from various industries for their products with quite a little wide selection of materials and optimal unique designing to new inquiries.
作为一家现代化的密封件厂家,英国拥有丰富的经验、先进的技术和创新的产品。广泛应用于矿山、机械制造等行业。对于许多叉车制造商来说,英国叉车密封件是最受欢迎的叉车部件之一。主要产品有:O形圈、星形圈、V形圈、骨架油封、组合密封、导向带……它涵盖了广泛的行业:机械制造业,液压工业,汽车制造业,阀门工业,制药机械工业…
As a modern sealing technology company, UKS has a wealth of experience in advanced technology and innovative products. Widely used in mining, machinery manufacturing and other industries. UKS forklift seal is a forklift manufacturers of many of the most popular forklift accessories.
UTEC是密封技术的领导者。可提供高品质的液压气动密封产品、工程塑料元件、高品质的密封材料及一整套无模具的密封生产技术。优泰克主要用于重工、中工、轻工。友泰克叉车密封件占叉车市场的12%。
UTEC Sealing Solutions is excellently equipped to meet the demands of today’s sealing technology.
SKF集团是全球领先的滚动轴承和密封件供应商。其业务范围包括轴承制造和密封件生产,以及轴承相关工具的推广,为客户提供各种解决方案和服务。
The SKF Group is a leading global supplier of rolling bearings and seals. Its business scope includes the manufacture of bearings and seals, as well as the promotion of bearing-related tools to provide customers with solutions and services.
DICHTOMATIK是世界上最大的密封件供应商之一。是一家专业生产和订购来自德国、瑞典、意大利和亚洲的印章的公司。
DICHTOMATIK's commitment to their customer’s success is matched only by our knowledge and experience in developing sealing solutions for a wide range of static and dynamic industrial application. The y offer one of the world’s most extensive and readily available line of shaft seals, o-rings, fluid power seals, and much more.
上一篇: 油封的泄漏的原因有哪些
下一篇: 高技术含量的橡胶密封件是怎么生成的
相关新闻
- 橡胶密封件厂家浅谈世界10大密封件厂商,你都了解么? 04-10
- 气动o型橡胶密封件介绍 04-10
- 橡胶密封圈规格型号有哪些? 04-10
- O形圈制造商的共享:选择O形圈的注意事项 04-10
- 各种橡胶密封件材料性能比较 04-10
- 机械密封的选用方法及应用要求 04-10
- 马桶橡胶密封圈—马桶橡胶密封圈的安装方法简介 04-10
- o型橡胶密封圈标准是什么? 04-10
- 橡胶密封件厂家告诉你密封件生产工艺流程 04-10
- 密封件厂家为您讲述O形橡胶密封圈的制造技术 04-10